ENATS 09-6 Telecommunications Cable - PE, SWA, PVC - 0.50mm

Overview

ENATS 09-6 Telecommunication cable is a polythene insulated, multipair, light current control cable which is intended to be used for feeder protection in control, alarm equipment and switchgear. The cable can also be used in power stations where the voltage does not exceed 150V d.c or 110V a.c. The cable can be installed where there is risk of mechanical impact due to the steel wired armouring.

Standards

• ENATS 09-6 issue 8 table E2A/E2.B section 2 - induced voltage between the pairs up to 15kV

Construction

Conductor: Solid plain annealed copper conductors
Insulation: Polyethylene insulated
Bedding: Polyethylene bedding
Armouring: Galvanised steel wire armour
Sheath: PVC sheath
Sheath Colour: Black

Characteristics

Temperature limits: -20°C to +70°C
Minimum Bending Radius: As Per Manufacturers Datasheet

Should not be installed at temperatures below 0°C or above +40°C

For more information please consult a member of the Cleveland Cable Sales Team