ConnectEV H07BZ5-F Electric Vehicle Charging Cable

This flexible cable is for use in the provision of vehicle power from consumer side units (Charging mode 1) European standard electric vehicle AC commercial and public installations (Charging mode 2 and 3). The cable is suitable for direct installation to the charging point or as a trailing EV plug that is carried in the vehicle.

Standards

• EN 50620
• IEC 62893
• EN/IEC 60228
• IEC60332-1-2
• IEC 61851-1

Construction

Conductor: Class 5 Flexible stranded copper
Insulation: Rubber Compound type EV1-2
Control Cores: Class 5 Flexible Copper Conductor
Tape: Longditudinal Water Blocking Tape
Pilot Core Insulation: Rubber
Sheath: Thermoplastic Polyurethane (TPEM)

Characteristics

Voltage Rating: 450/750 Volts
Temperature Limits: -35°C to +90°C
Maximum Short Circuit Temp: +250°C
Minimum Bending Radius: As per cable manufacturer datasheet

Should not be installed at temperatures below 0°C