SSE Approved Power Cable - 11kV, XLPE, LLDPE - 95mm to 300mm

Overview

SSE approved medium voltage aluminium power cable for connections from electrical grid to sub-main developments. Suitable for power networks, underground, outdoors and installation in cable ducting.

Please note: the red outer sheath can be prone to fading when exposed to UV rays.

Standards

• BS 7870 4.20
• BS EN 60228
• Flame propagation to BS EN60332
• DNO approved for SSE

Construction

Conductor: Class 2 Stranded Circular Compacted Aluminium Conductor
Screen: Fully Bonded Semi-conductive Compound
Insulation: Cross Link Polyethylene (XLPE)
Insulation Screen: Semi-conductive Compound
Screen: Copper Wires & Helical Equalising Copper Tape
Separator: Binding Tape Helically Applied
Sheath: Linear Low-Density Polyethlyene (LLDPE)
Sheath Colour: Red

Characteristics

Voltage Rating: 6350/11000 Volts (11kV)
Temperature Limits: -15ºC to 90ºC
Minimum Bending Radius: As per cable manufacturer datasheet

Should not be installed at temperatures below 0ºC or above +60ºC